Bed Size Calculator: What Fits My Room?

Enter your room dimensions, compare every standard mattress size, and see the exact walking clearance before you buy a bed or frame.

bed size calculator

How this bed size calculator helps

Shoppers planning a bedroom layout before choosing a mattress size.

Check room clearance
Compare mattress sizes
Avoid cramped bedroom layouts
Comfortable fit10' 0" × 12' 0" room

Queen: 30" per side and 64" at the foot

This clears the 30-inch comfort guideline on both measured routes. The largest comfortable or workable starting point here is Cal King.

Room Dimensions

Try a common room size

ft
in
ft
in

Bed Size

Shop Best Queen Mattresses
10' 0"
12' 0"
Queen60" × 80"
30"
64"

Side Clearance

Comfortable (>30")

Vertical Clearance

Comfortable (>30")

Room fit comparison

Which bed sizes fit this room?

The calculation centers the headboard on the room-width wall. It does not subtract nightstands, radiators, door swings, drawers, or the extra width of a bed frame.

Bed sizeMattressEach sideAt footVerdict
Twin38" × 75"41"69"Comfortable fit
Twin XL38" × 80"41"64"Comfortable fit
Full54" × 75"33"69"Comfortable fit
Queen60" × 80"30"64"Comfortable fit
King76" × 80"22"64"Tight fit
Cal King72" × 84"24"60"Workable fit

Affiliate Disclosure: MattressProducts.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.

Bedroom Layout Rules of Thumb

30 Inches is Golden

Ideally, you want 30 inches of walking space around any side of the bed you need to access.

Minimum 24 Inches

Anything less than 24 inches will feel cramped and make it difficult to make the bed.

Account for Drawers

If you have dressers, you need 36+ inches to open drawers fully while standing in front of them.

Bed size by common room dimensions

These are starting points using mattress dimensions only. Add the actual bed frame, nightstands, storage furniture, doors, vents, and accessibility needs before ordering.

Room sizePractical starting pointWhat to know
9 × 10 ftQueenA Queen reaches the 24-inch minimum per side, so furniture placement will be tight.
9.5 × 9.5 ftQueenA Queen leaves about 27 inches per side and 34 inches at the foot.
10 × 10 ftQueenA Queen leaves 30 inches per side; a King drops below 24 inches.
10 × 12 ftQueenA Queen has comfortable side clearance and generous space at the foot.
12 × 12 ftKing or Cal KingBoth sizes clear the 30-inch guideline on accessible sides.
12 × 14 ftKing or Cal KingBoth sizes leave room for larger walkways and furniture planning.

Need a chart for your article or room plan?

Use our scale-consistent U.S. mattress-size SVG with visible dimensions and free embed code.

Get the size chart

Common Size Questions

How much clearance space do I need around my bed?
The golden rule is 30 inches of walking space around any side you access. The absolute minimum is 24 inches to avoid feeling cramped. For wheelchair access, aim for 36-60 inches.
Can a Queen bed fit in a 9.5x9.5 room?
Yes, a 60-by-80-inch Queen fits in a 9.5-by-9.5-foot room in the calculator's centered orientation. It leaves about 27 inches on each side and 34 inches at the foot before accounting for the frame, nightstands, doors, or drawers.
Will a King size bed fit in a 10x10 room?
It fits physically but is very tight. A King is 76" wide, leaving only 44" of total walking space (22" per side). This is below the recommended 24" minimum, so you won't fit nightstands easily.
Can two adults comfortably sleep on a Full mattress?
It's cozy. A Full bed gives each person only 27 inches of width (the width of a crib). For everyday sleeping, a Queen (30" per person) is significantly more comfortable for couples.
What is the difference between King and California King?
A Standard King is wider and shorter (76" x 80"). A California King is narrower and longer (72" x 84"), making it better for tall people or narrower rooms.
What is the best bed size for a 12x12 bedroom?
A 12x12 room is perfect for a King Size bed. You'll have plenty of room for two nightstands and about 34 inches of walking space on either side, which feels spacious and luxurious.

Quick guide

Bed Size Calculator: what to check first

Use this tool as a starting point, then confirm product details, health guidance, seller terms, and live availability where relevant before making a final decision.

Step 1

Enter room width and length

Step 2

Choose a bed size

Step 3

Review side and foot clearance

Step 4

Account for nightstands, drawers, and doors

Clearance matters as much as mattress size

A mattress can physically fit but still feel wrong if there is not enough space to walk, open drawers, or make the bed comfortably.

Plan around real furniture

Nightstands, dressers, closet doors, benches, and radiators often decide whether a Queen, King, or California King is practical.

Use the result before checkout

Measure twice and compare the calculator output with the product dimensions listed by the seller, especially for frames, foundations, and adjustable bases.

Search questions this tool answers

What room size is best for a Queen bed?

A Queen usually works well in rooms around 10 by 10 feet or larger, but drawer clearance and door swings can change the practical fit.

How much walking space should be around a bed?

About 30 inches feels comfortable for most walkways, while 24 inches is a tighter minimum for many rooms.

Should I choose King or California King?

Choose King when width matters most and California King when extra length is more important for taller sleepers or narrower rooms.

Can a Queen bed fit in a 9.5 by 9.5 foot room?

Yes. A Queen fits physically and leaves about 27 inches on each side and 34 inches at the foot when centered on the 9.5-foot wall. Subtract the frame, nightstands, door swings, and other furniture before deciding.

Will a King bed fit in a 10 by 12 foot room?

A King fits physically, but it leaves about 22 inches on each side when centered on the 10-foot wall. That is below the calculator's 24-inch practical minimum, so a Queen is usually the easier layout.